TrainMaster Command Set

Here is everything you need to get started with TrainMaster Command Control. The CAB-1 Remote Controller (6-12868) allows you to walk around your layout while controlling all of your TrainMaster Command Control equipped locomotives and accessories. The TMCC Command Base (6-12911) receives the signals from the remote and sends your commands across your layout. Only one Command Base is needed per layout, regardless of the number of track power blocks you are controlling. It is the perfect way to start enjoying the benefits of the revolutionary Lionel TrainMaster Command Control system. (Track and accessory power supplies not included.)

To run non-Command locomotives remotely, add a TMCC PowerMaster, TPC 300, or TPC 400.

(6-12969) $147.99 now only 133.00

For mor information on the TrainMaster Command Control (TMCC), please see the Buyer's Guide

Power Adaptor Cable

This power adapter cable connects your transformer to the PowerMaster for operating TrainMaster® Command and Non-TrainMaster® Command equipped locomotives.

(6-12893) $8.99

Command Base Cable 6 ft.
The Command Base Cable connects the TMCC controllers to the TrainMaster Command Base.

(6-14191) $10.59

Command Base Cable 20 ft

(6-14195) $11.99

TMCC TPC Cable Set

The TMCC TPC Cable Set connects parallel PowerHouse transformers to the TPC 300/400. The set also includes adapter plugs to wire your transformer to the TPC 300/400.

(6-14194) $13.99

TMCC Direct Lockon

Connect your PowerHouse Power Supply directly to the track with the TMCC Direct Lockon. Featuring a selectable current setting (for the 135-Watt or 180-Watt PowerHouses), the Direct Lockon eliminates the need for a PowerMaster if you run only TMCC-equipped locomotives. For added safety, the Direct Lockon provides over-current protection and an automatic reset. It is compatible with both Lionel FasTrack and O/O27 track systems. Includes power wire with FasTrack connectors and one standard Lionel Lockon.

(6-34120) $44.99 only 40.49

3-Wire Command Base Cable

The 3-Wire Command Base Cable connects the TMCC ARC to the TrainMaster Command Base (6-12911).

Use Command Base Cable 6-14191 or 6-14195 for layouts that do not include a TMCC ARC.

(6-14192) $11.59

Controller to Controller Cable 20 ft.
The Controller to Controller Cable connects the TMCC controllers together.

(6-14197) $9.49

Controller to Controller Cable 6 ft.

(6-14196) $6.99

Controller to Controller Cable 1 ft.

(6-14193) $4.19

ZW and PowerHouse Power Supply Set

There’s only one ZW. No single product has come to symbolize the legend of Lionel more than the Lionel ZW. Molded to original dimensions in classic phenolic resin, the ZW can run up to four trains at the same time on different layouts, plus accessories. The two engineer-type handles provide independent control of two variable voltage circuits, each with built-in whistle, direction, and bell controls. Two additional accessory circuits can be set by means of dial-type controls to any desired voltage. Or if you prefer, you can control all four outputs with a single handle!

The ZW controller can be powered by any combination of one to four 135-Watt or 180-Watt Lionel PowerHouse Power Supplies. And if you use the TrainMaster Command Control system, you can adjust each output using your walk-around remote control up to the level pre-set by its corresponding ZW handle. It’s a great way to help less experienced railroaders keep their trains under control while enjoying the thrill of independent remote-controlled operation.

Offered with two 180-Watt PowerHouse Power Supplies, this ZW package provides the power and control you dream of for your vintage or state-of-the-art Lionel locomotives and accessories.

(6-32930) $429.99 now ony $386.99

180-WattPowerHouse™ Power Supply

Power your railroad empire with an advanced 180-Watt PowerHouse Power Supply. UL® - listed for safe operation, this mighty power supply is perfect for your TMCC Track Power Controller or Direct Lock-On.

(6-22983) $99.99 now only 89.99

36 Watt Accessory Transformer

Power your Lionel accessories with the 36-Watt Accessory Transformer. This affordable power supply features variable AC voltage so you can supply the right amount of power to your accessories.

(6-32923) $36.99 now only 33.29

CW-80 80-Watt Transformer

Enjoy operating your favorite locomotives,train sets and accessories with the all-new CW-80 80-Watt transformer. From the handsomely designed controller, reminiscent of the famous Lionel ZW, control speed and power by raising and lowering the engineer handle. Operate your favorite features with the bell, whistle/horn and direction buttons. On the rear of the unit, you will find a 0-18 volt variable AC output, as well as a variable, programmable AC output for accessory operation. Simply set the accessory voltage to your desired output, and your accessory operates at that output until you turn the unit off - even when you stop the train! Perfect for train sets and small- to medium-sized layouts, the CW-80 provides the power you need to enjoy all your Lionel favorites.

(6-14198) $124.99 Now only 112.49