Lionel 6-82869 LCS SensorTrack - Multi System Compatible
Features:
 SensorTrack Capabilities and Features:
Set the LCS SensorTrackâ„¢ to automatically perform one of eight pre-programmed actions every time an IR equipped locomotive passes over it.
Pre-programmed actions include whistle and horn blows, CrewTalkâ„¢, and bell ringing
Arrival and departure announcements vary according to the engine’s direction of travel
The LCS SensorTrackâ„¢ gathers all information directly from the locomotive without the need to use the orange module. This feature is especially useful when your layout hosts visiting locomotives (LEGACY Command Set required).
Locomotive information and ID automatically load into all of your LEGACYâ„¢ CAB-2 remotes as they pass over the LCS SensorTrack
Create your own custom actions by recording commands made with your CAB remote or LCS App.
Actions you record can include opening couplers, activating switch tracks, or any command made with the CAB remote or LCS App.
Your custom action can include up to 250 time-stamped commands
Your custom recordings can be activated by all IR engines passing over the LCS SensorTrack or
limited to just the locomotive that was used to create the recording.
Each LCS SensorTrack holds two custom recordings—one for each direction of travel for each IR-equipped locomotive.
NOTE: The LCS SensorTrackâ„¢ works only with IR equipped engines. All Legacy locos made after November 2011 and ALL Vision locos are IR equipped. For a complete list of IR equipped locomotives. A LEGACYâ„¢ CAB 1L or CAB 2 is required.
Reviews 1
Write Your Own Review
What's this? Check "Remember Me" to access your shopping cart on this computer even if you are not signed in.