Used TCS T1 Decoder and ROHS 3006 S254X 8-Pin Board wo/Box

This set contains one(1) TCS T1 DCC decoder and one(1) ROHS 3006 S254X#PCB01 REV:A board. These items are in Excellent Condition from a smoke-free home/collection. The wiring on the ROHS board is clipped with the solder remaining. All pins are intact on the TCS T1 decorder with minimal wear showing.

See images for more!

TCS T1 Original Description:

The T1 is a multi-purpose HO-scale decoder. This decoder may be hard-wired or plugged directly into any locomotive with a 9-pin JST plug. This decoder is also available with adapter harnesses with 8-pin NMRA plugs installed. See the "Variants" page for more options.

Note: The Green and Purple wires on this decoder are not used. The T1 is a 2-function decoder, but still uses the 9-pin JST which includes the Green and Purple wires.

Additional Note: These decoders are a popular choice for use on turntables or other applications where precise motor control is necessary. The ability to set up button-controlled BEMF allows you to automatically and accurately step your turntable. See our programming guides in the literature section for more information on Button-controlled BEMF.

• Back EMF Load Compensation: Provides superior slow speed control and high performance under load.
• Quiet Drive: Super-quiet motor control for "buzz" free motor performance.
• DC Mode: Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.
• Variable Momentum: Allows you to make custom acceleration and deceleration curves.
• Incandescent Bulb Support: This decoder can be used with 12 Volt bulbs.
• Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder.
• Programmable Lighting Effects:Choose from 20 separate user-programmable lighting effects!
• Dimmable Brightness: Configure multiple different brightness levels for your LED's or incandescent bulbs.
• Decoder Lock: Feature which prevents accidental/unwanted programming while activated.
• Airwire™ Compatible: Fully compatible with Airwire™ operation.
• User-Loadable Speed Tables: Configure custom speed curves and set speed limits.

Specs:

• Interface Type: Direct-Plug (9-Pin JST)
• Dimensions :(L x W x H): 0.969" x 0.661" x 0.193" or 24.61mm x 16.79mm x 4.9mm
• Scale: HO Scale
• Continuous/Peak: 1.3/2.0 Amp
• Total Functions: 2
• Function Rating: 100 mA
• 12V Outputs: 2